Have you ever stuck in an infinite buffer loop while loading your favorite show on the Roku? If yes, then don’t panic. It is very easy to bring Roku again in a working state. There are some critical situations, as well, when any video might stop at a critical moment or stuck in the same loop. Whatever problem you are facing, find the exact cause of your issue and apply some troubleshooting techniques to fix the problem as soon as possible.
Though the Roku buffering is quite a frustrating issue, resolving the problem isn’t that hard. You need to make some changes in your network connection and the Roku software to bring it into a working state. Here, in this article, you can check various methods to fix the issue and continue enjoying your content seamlessly.
What Causes Roku Buffering Problems?
You must know why does Roku keeps buffering all the time. There can be multiple reasons for this issue. It may be due to weak Wi-Fi or a problem with your streaming gadget. You might have a high-speed internet connection. For this, you can put your device set up around a good Wi-Fi connection.
Your Wi-Fi network affects the performance of Roku TV very much. So, it is recommended to have a good network. In turn, the signal gets even slower if you don’t have a proper Roku TV setup. You have to properly connect some of the devices to prevent buffering.
Here are a few tips to fix buffering on your Roku TV.
Method 1: Check Your Wi-Fi Speed
First of all, you must make sure that you have high-speed internet speed as this is what you’re paying for. If you are facing a problem with any specific device, use another Wi-Fi-enabled device and run a speed test to check if your device is compatible. You can do the same via an ethernet connection to find the difference between the two.
If you have low Wi-Fi speed, you can use several methods to fix it. First, move your Wi-Fi router near to your streaming device. Next, opt for a more powerful router or even any of the new mesh routers. Finally, this may solve the problem but if the issue still persists, you can use an Ethernet power jack to hardwire the streaming player. After setting up Roku TV, you must know how to pair a Roku remote to access other functionalities.
Method 2: Manual Restart
Sometimes, the screen of your Roku TV might get completely frozen and you won’t be able to access its menu. There is a pre-set sequence of remote buttons that you can use to restart your Roku TV.
You can manually start your Roku TV by pressing the Home button about four-five times and press the arrow Up only once. Then, press the Rewind and Fast Forward button twice in the same sequence.
Method 3: Reset Your Roku TV
If none of the above methods has worked, reset your Roku TV. To know how to reset Roku, follow the steps given below:
- Firstly, delete all the streaming app on your Roku device. Then, you have to re-install them again after a few minutes.
- Reset your Roku device to the default factory settings. For this, go to Settings, click on the Advanced System Settings option from the left panel of the screen, and then choose the Factory Reset option.
- Enter all the code displayed on the Advanced System Settings window.
- You can also press the Reset button to reset your Roku Express device.
- Disconnect your Roku Express device from the power source.
- Again, connect the power cables to the Roku Express device and the electrical socket after waiting for a minute.
Method 4: Check All Hardware
There can be some hardware-related issues in your system that make Roku TV unable to function properly. Hardware problems mainly include physically damage dongle or break cables. But there’s a possibility that there might be some issue in your ethernet cable that can disturb your wired connection. To fix this problem, you can also take the cable out and test it on another device with an ethernet connection. It is also recommended to turn off Wi-Fi on that device to get accurate results.
Frequently Asked Questions
What Internet speed do I need for Roku?
Roku mentions that you must have an Internet connection with at least 1.5 Mbps download speed for standard definition content and 3.0 Mbps for HD.
How do I change the streaming quality on Roku?
Firstly, power on your Roku device, then press the Home button on your Roku remote control. Go to Settings > Display type. Remove the tick adjacent to the Auto-Detect option and then select your desired video resolution rate as per your need.
How can I improve my Roku Streaming?
There are several methods by which you can improve your Roku streaming. Reduce the number of obstructions to improve signal strength. Adjust router antennas and try re-orienting the antennas and check the signal strength. It is generally recommended to set the antenna at an elevated location.